|
Description :
Solar Water Heater,
Technical Parameters:
Vacuum tube
Spec.(mm)
Φ47×1500 Φ58×1800 Φ70×2000
Tube (pcs)
12 / 15 / 16 / 18 / 20 / 22/ 24 / 28 / 30 / 36 / 42
Material
3.3 Borosilicate glass, magnetron spluttering selective coating
Coating
AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN
Water tank
Capacity
70 ~ 400L for inner water tank
Inner tank
Food-grade stainless steel plate SUS304-2B
Insulation
High-density polyurethane integrated foam-forming 50~60mm
Tank shell
Color steel plate
Bracket
Spec.(mm)
1.2 ~ 1.5mm thickness
Material
Hot-dip galvanized steel plate
Accessories
Stainless bolts & nuts, Silicon rubber seal, Dustproof rubber seal, Plastic pipe holder
Optional device
Electrical heater, Intelligent controller / Assistant tank, Anod magnesium bar
Tilt angle
25°~ 50°
Water output
45-95oC
Hail resistance
Φ25mm diameter
Features description:
Non-pressurized solar water heater is such a most economical system with high efficiency at the same time. It works depending on the gravity of water, so it's much better to be installed on the slope or flat roof as top as possible to get enough hydraulic pressure for shower. A simple assistant tank can be equipped for tap water refill automatically or with an intelligent controller to control the auxiliary heating device and water refill at the same time.
Vacuum tube: Hail-resisting 3.3 borosilicate glass with high-tech single-target selective coating ensures an efficient solar collecting, tri-target vacuum tube with its patent interference coating makes the efficiency not only improved by 12% but also with a 380oC high temperature resistantce without peeling off the coating layer.
Inner water tank: Food-grade stainless steel SUS304-2B as inner tank keeps the water clean and drinkable, together with advanced argon arc welding technics to ensure it with a long lifespan (more than 15 years).
Water tank shell: Imported color steel plate, with its special coating treatment ensures a long life even to ocean coast weather.
Insulation Layer: High-density polyurethane integrated foam-forming with twice slaking treatment, preserves hot water temperature as long as 70~80 hours.
Supporting Bracket: Very strong hot-dip galvanized steel plate with a good weight bearing and wind resistance design (140 km/hr), painting or baking process ensures a super mechanical performance and corrosion resistance, easy installation, universal bracket suitable for either flat and slope roof installation.
Accessories: Stainless bolts & nuts, water-proof silicon rubber, anti-aging dustproof rubber seal, plastic pipe holder and ventilating cap to ensure their lives as long as other parts of the systemSHANGHAI/NINGBO10-20DAYS
 Certification :
Origine du produit :
INFORMATION TARIFAIRE :
200
|
